CLATPS(3)      LAPACK routine of NEC Numeric Library Collection      CLATPS(3)



NAME
       CLATPS

SYNOPSIS
       SUBROUTINE CLATPS (UPLO, TRANS, DIAG, NORMIN, N, AP, X, SCALE, CNORM,
           INFO)



PURPOSE
            CLATPS solves one of the triangular systems

               A * x = s*b,  A**T * x = s*b,  or  A**H * x = s*b,

            with scaling to prevent overflow, where A is an upper or lower
            triangular matrix stored in packed form.  Here A**T denotes the
            transpose of A, A**H denotes the conjugate transpose of A, x and b
            are n-element vectors, and s is a scaling factor, usually less than
            or equal to 1, chosen so that the components of x will be less than
            the overflow threshold.  If the unscaled problem will not cause
            overflow, the Level 2 BLAS routine CTPSV is called. If the matrix A
            is singular (A(j,j) = 0 for some j), then s is set to 0 and a
            non-trivial solution to A*x = 0 is returned.




ARGUMENTS
           UPLO      (input)
                     UPLO is CHARACTER*1
                     Specifies whether the matrix A is upper or lower triangular.
                     = 'U':  Upper triangular
                     = 'L':  Lower triangular

           TRANS     (input)
                     TRANS is CHARACTER*1
                     Specifies the operation applied to A.
                     = 'N':  Solve A * x = s*b     (No transpose)
                     = 'T':  Solve A**T * x = s*b  (Transpose)
                     = 'C':  Solve A**H * x = s*b  (Conjugate transpose)

           DIAG      (input)
                     DIAG is CHARACTER*1
                     Specifies whether or not the matrix A is unit triangular.
                     = 'N':  Non-unit triangular
                     = 'U':  Unit triangular

           NORMIN    (input)
                     NORMIN is CHARACTER*1
                     Specifies whether CNORM has been set or not.
                     = 'Y':  CNORM contains the column norms on entry
                     = 'N':  CNORM is not set on entry.  On exit, the norms will
                             be computed and stored in CNORM.

           N         (input)
                     N is INTEGER
                     The order of the matrix A.  N >= 0.

           AP        (input)
                     AP is COMPLEX array, dimension (N*(N+1)/2)
                     The upper or lower triangular matrix A, packed columnwise in
                     a linear array.  The j-th column of A is stored in the array
                     AP as follows:
                     if UPLO = 'U', AP(i + (j-1)*j/2) = A(i,j) for 1<=i<=j;
                     if UPLO = 'L', AP(i + (j-1)*(2n-j)/2) = A(i,j) for j<=i<=n.

           X         (input/output)
                     X is COMPLEX array, dimension (N)
                     On entry, the right hand side b of the triangular system.
                     On exit, X is overwritten by the solution vector x.

           SCALE     (output)
                     SCALE is REAL
                     The scaling factor s for the triangular system
                        A * x = s*b,  A**T * x = s*b,  or  A**H * x = s*b.
                     If SCALE = 0, the matrix A is singular or badly scaled, and
                     the vector x is an exact or approximate solution to A*x = 0.

           CNORM     (input/output)
                     CNORM is REAL array, dimension (N)

                     If NORMIN = 'Y', CNORM is an input argument and CNORM(j)
                     contains the norm of the off-diagonal part of the j-th column
                     of A.  If TRANS = 'N', CNORM(j) must be greater than or equal
                     to the infinity-norm, and if TRANS = 'T' or 'C', CNORM(j)
                     must be greater than or equal to the 1-norm.

                     If NORMIN = 'N', CNORM is an output argument and CNORM(j)
                     returns the 1-norm of the offdiagonal part of the j-th column
                     of A.

           INFO      (output)
                     INFO is INTEGER
                     = 0:  successful exit
                     < 0:  if INFO = -k, the k-th argument had an illegal value






FURTHER DETAILS
             A rough bound on x is computed; if that is less than overflow, CTPSV
             is called, otherwise, specific code is used which checks for possible
             overflow or divide-by-zero at every operation.

             A columnwise scheme is used for solving A*x = b.  The basic algorithm
             if A is lower triangular is

                  x[1:n] := b[1:n]
                  for j = 1, ..., n
                       x(j) := x(j) / A(j,j)
                       x[j+1:n] := x[j+1:n] - x(j) * A[j+1:n,j]
                  end

             Define bounds on the components of x after j iterations of the loop:
                M(j) = bound on x[1:j]
                G(j) = bound on x[j+1:n]
             Initially, let M(0) = 0 and G(0) = max{x(i), i=1,...,n}.

             Then for iteration j+1 we have
                M(j+1) <= G(j) / | A(j+1,j+1) |
                G(j+1) <= G(j) + M(j+1) * | A[j+2:n,j+1] |
                       <= G(j) ( 1 + CNORM(j+1) / | A(j+1,j+1) | )

             where CNORM(j+1) is greater than or equal to the infinity-norm of
             column j+1 of A, not counting the diagonal.  Hence

                G(j) <= G(0) product ( 1 + CNORM(i) / | A(i,i) | )
                             1<=i<=j
             and

                |x(j)| <= ( G(0) / |A(j,j)| ) product ( 1 + CNORM(i) / |A(i,i)| )
                                              1<=i< j

             Since |x(j)| <= M(j), we use the Level 2 BLAS routine CTPSV if the
             reciprocal of the largest M(j), j=1,..,n, is larger than
             max(underflow, 1/overflow).

             The bound on x(j) is also used to determine when a step in the
             columnwise method can be performed without fear of overflow.  If
             the computed bound is greater than a large constant, x is scaled to
             prevent overflow, but if the bound overflows, x is set to 0, x(j) to
             1, and scale to 0, and a non-trivial solution to A*x = 0 is found.

             Similarly, a row-wise scheme is used to solve A**T *x = b  or
             A**H *x = b.  The basic algorithm for A upper triangular is

                  for j = 1, ..., n
                       x(j) := ( b(j) - A[1:j-1,j]' * x[1:j-1] ) / A(j,j)
                  end

             We simultaneously compute two bounds
                  G(j) = bound on ( b(i) - A[1:i-1,i]' * x[1:i-1] ), 1<=i<=j
                  M(j) = bound on x(i), 1<=i<=j

             The initial values are G(0) = 0, M(0) = max{b(i), i=1,..,n}, and we
             add the constraint G(j) >= G(j-1) and M(j) >= M(j-1) for j >= 1.
             Then the bound on x(j) is

                  M(j) <= M(j-1) * ( 1 + CNORM(j) ) / | A(j,j) |

                       <= M(0) * product ( ( 1 + CNORM(i) ) / |A(i,i)| )
                                 1<=i<=j

             and we can safely call CTPSV if 1/M(n) and 1/G(n) are both greater
             than max(underflow, 1/overflow).



LAPACK routine                  31 October 2017                      CLATPS(3)